Overview
You can see your LF Audio readings without opening the LF Audio app.
- Android: add LF Audio widgets to your home screen. Each one shows live data from the device and channels you pick. The steps are below.
- iPhone: add the Voltage widget, and see your live voltage on the Lock Screen. Both can show on your car's Apple CarPlay screen too. See iPhone: Widget, Lock Screen and CarPlay.
Android Auto does not show LF Audio readings today.
Adding a Widget
These steps are for Android. For iPhone, see iPhone: Widget, Lock Screen and CarPlay.
- Long-press on an empty area of your Android home screen.
- Select Widgets from the menu.
- Find the LF Audio widget and drag it to your home screen.
- The new widget says Tap to configure. Tap it to choose a device and readings.
Configuring a Widget
| Setting | Description |
|---|---|
| Device | Tap Select a device and pick which paired device this widget monitors. |
| Channel Selection | Pick which data streams from that device to display. Every stream the device exposes (voltage, each temperature probe, per-channel volume, IDS limit, and so on) appears as a checkbox, and you can enable multiple at once. By default all streams are enabled when you pick a device. Each enabled stream also has its own color override and a reset-color button. |
| Refresh Rate (Hz) | How often the widget updates (1-10 times per second). Higher rates use more battery. |
| Show Graph | Toggle whether to display a mini graph alongside the current value. |
A refresh rate of 2 Hz (the default) provides a good balance between responsiveness and battery life. Higher rates are useful for active monitoring but will increase battery drain.
Using Widgets
- The widget displays the current value from your selected device and channel. The readings come first; it shows as many as fit, up to 8.
- Make the widget bigger to see more readings, the device name, the graph, and Low and High. These show only when there is room.
- On an HPVM, each voltage shows in its zone colour.
- The widget follows your phone's day or night look.
- Tap the widget to open the LF Audio app at that widget's settings page, where you can change its device and readings.
- The widget updates automatically while the app is running in the background.
The widget requires the LF Audio app to be running (at least in the background) and connected to the device via Bluetooth. If the app is force-closed or the device is out of range, the widget will show the last known value.
Removing a Widget
Long-press the widget on your home screen and drag it to Remove or tap the X icon, depending on your Android launcher.
iPhone: Widget, Lock Screen and CarPlay
The iPhone shows the voltage of the device the app is connected to. There are two ways to see it.
| What | Where | How fresh |
|---|---|---|
| Voltage widget (small or medium) | Home Screen, and the CarPlay screen | A quick look at the last reading. The medium size also shows the low and high of the last 10 minutes. A green dot means the device is connected. |
| Live voltage (Live Activity) | Lock Screen and Dynamic Island, and the CarPlay screen | Live, about once a second, while the app runs. |
Add the Voltage widget:
- Touch and hold an empty spot on your Home Screen until the apps jiggle.
- Tap Edit, then Add Widget.
- Find LF Audio and pick Voltage.
- Choose small or medium, then tap Add Widget.
Turn on the live voltage:
- Open the LF Audio app and connect to your device.
- In the app, go to Settings > Bluetooth and make sure Live Activity is on. It is on unless you turned it off.
- The live voltage starts while the app is open. It stays on the Lock Screen when you leave the app.
See it on CarPlay:
- On your iPhone, open Settings > General > CarPlay and pick your car.
- Turn on widgets, then add the LF Audio Voltage widget.
- The live voltage can show on the CarPlay screen too while it runs.
CarPlay widgets need a recent iOS (iOS 26 or newer). The widget needs iOS 14 or newer, and the live voltage needs iOS 16.2 or newer.
While the widget or the live voltage is on, the app keeps that device connected in the background, so the reading stays current.
App Icon Shortcuts
On Android and iPhone, touch and hold the LF Audio app icon for three shortcuts:
| Shortcut | Opens |
|---|---|
| Record | Record a run on the Tools tab, to record a video with your readings. See Video Capture. |
| Chat with us | A new chat with LF Audio support, on the Contact side of the Support tab. See Support and Warranty. |
| Shop | The Shop tab. |
On Android, you can drag a shortcut onto your home screen to keep it as its own icon.
Related
- Device Monitoring: full monitoring view in the app
- Apple Watch App: your volts and volume on your Apple Watch