Tone Generator

advanced

Overview

The LF Audio app includes a built-in audio tone generator for system tuning and speaker testing. It works independently, with no LF Audio device connection required. To open it:

  1. Tap Tools in the bottom navigation.
  2. Under Play, tap Tone generator.

If the app knows none of your LF Audio gear, it opens on Tools. See Tools.

While a tone plays, a Tone playing strip shows at the top of Tools. Tap it to go back to the generator, or tap Stop to stop the tone.

In the generator, three chips pick the mode: Constant, Sweep and Burps.


Bass Presets

BASS PRESETS plays a bass tone with one tap:

  • 30 Hz, 40 Hz or 50 Hz: tap one to play that tone at once.
  • Sweep 20 to 80 Hz: tap it for a bass sweep from 20 Hz to 80 Hz.

Constant Frequency Mode

The default mode generates a continuous tone at a fixed frequency.

Controls

Control Description
Frequency Adjustable from 1 Hz to 22,000 Hz. Use the slider for quick changes, or tap the frequency display to type an exact value.
Volume Output level from 0% to 100%.
Pan Stereo positioning from full left to full right. Snaps to center when close to the midpoint.
Waveform Choose between Sine, Square, Sawtooth, or Triangle wave shapes.
Step Size Sets the Hz increment used by the − and + buttons on either side of the Play button (1, 10, 100, or 1,000 Hz). The main frequency slider is logarithmic and ignores step size. Step size is chosen inside the 'Set Frequency' dialog (tap the Hz readout to open).

Tap the Play button to start generating audio. Tap again to stop.

Tip

Long-press the frequency display to toggle decimal precision; useful for fine-tuning around a specific frequency.


Sweep Mode

Sweep mode automatically moves through a range of frequencies over a set period. This is useful for testing speaker response across a frequency range.

Sweep Controls

Control Description
Start Frequency The beginning frequency of the sweep.
End Frequency The ending frequency of the sweep.
Duration How long the sweep takes (in seconds).
Sweep Type Three options: Linear (even Hz/second), Log (logarithmic: more time spent at lower frequencies, matches how human hearing perceives pitch), or Stepped (discrete tones held briefly at each step).
Step Size For Stepped sweeps, controls how many Hz separate consecutive tones.
Loop When enabled, the sweep repeats continuously.

A progress indicator shows the current position in the sweep and the real-time frequency being generated.

Tip

Use Stepped sweeps when you want to listen carefully to a few specific frequencies, or when you are measuring SPL/THD at known test tones. Use Logarithmic sweeps when you want a smooth, musical-feeling sweep across a wide range.


Burps Mode

Burps plays short bursts of your tone, not one long tone.

Control Description
BURP LENGTH How long each burst lasts: 0.5 s, 1 s, 2 s or 3 s.
Repeat every 2 s When on, the bursts keep coming, with a 2 second pause between them, until you stop.
Tip

In Burps, tap a bass preset such as 40 Hz to play a burst of that tone.


Waveform Types

Waveform Character Best For
Sine Pure, clean tone General testing, frequency response measurement
Square Harsh, buzzy Testing for distortion, checking amplifier clipping behavior
Sawtooth Bright, rich in harmonics Stress testing speakers across harmonics
Triangle Softer than square, mellow Moderate harmonic testing

A live waveform animation shows the shape of the signal being generated.


Background Playback

By default, the tone keeps playing when you go back, leave the Tools tab, or minimize the app. If you would rather it stop automatically:

  1. Open Settings (the gear at the top right of the app).
  2. Scroll to the Generator section.
  3. Turn off Play in Background.

With the toggle off, the tone stops when you go back, open another tab, or leave the app.

Warning

Be mindful of volume levels when using background playback, especially with speakers connected. A sustained high-frequency tone at high volume can damage tweeters.