Display Customization and App Settings

basic

Overview

You set up your HPVM or HPVM Pro in the LF Audio app. The meter settings have three tabs:

  • Face: the face on your meter, and the settings that face uses.
  • Voltages: every voltage your meter uses, on one scale.
  • Meter: settings that are the same on every face, like screen direction, sleep, calibration and updates.

Your live voltage shows at the top right the whole time. The meter changes as soon as you tap.

Note

The new faces from firmware 3.3, and Competition, are on the HPVM Pro and the HPVM with v1.4 hardware. An HPVM with older hardware gets them in a later update. The HPVM-24 and the HPVM-440 keep their current faces. See Firmware Updates.

Accessing Display Settings

  1. Turn on your meter.
  2. Open the LF Audio app.
  3. In Garage, tap your meter.
  4. Tap the gear at the top right. On a small screen it may be under the More menu, as Settings.
  5. Tap SETTINGS at the top.
  6. The meter settings open on the Face tab.

The Face tab of the meter settings, with the Speedometer face, its description, and the tiles for the settings it uses

  1. The face on your meter, drawn in your colours. Tap the arrows to step to the next face.
  2. All faces: see every face by name.
  3. This face uses: only the settings this face uses. The tiles change when you change the face.

Gauge Face Options

To pick a face:

  1. Open the meter settings. The Face tab opens.
  2. Tap All faces.
  3. Tap a group at the top: Classic 1 to 10, New in 3.3 or Competition.
  4. Tap a face. Your meter shows it right away. The face you picked says On the meter.

All faces in the app, on the New in 3.3 group, with Hero on the meter and Tiles, Rings and Scope below

You can also tap the arrows on the Face tab to step through the faces one at a time.

To see every face on the meter, with a picture of each one, see Pick Your Face.

On the HPVM Pro, when a 4-cell lithium pack is wired to all four channels, the meter shows the cell view in place of your face. Your face comes back when the pack is no longer wired that way. See 4-Channel Lithium Cell Monitoring.

Note

New faces come with firmware updates. Keep your meter updated in the LF Audio app.

Decimal Precision Setting

Pick how many numbers show after the point, from 1 to 3. One is calm for quick looks while driving. Three shows every millivolt.

  1. Open the meter settings. The Face tab opens.
  2. Tap the Decimals tile.
  3. Tap 1 decimal, 2 decimals or 3 decimals. Each one shows your voltage the way the meter will.
  4. Tap Done.

The Decimals sheet with 1, 2 and 3 decimals, 2 decimals picked

Color and Voltage Threshold Settings

Your meter colours each reading by its voltage: green, yellow, orange or red. You pick where each colour starts on the Voltages tab.

Large voltage on the HPVM-PRO with every channel in the orange zone

Set the voltages on the ladder:

  1. Open the meter settings and tap the Voltages tab.
  2. Tap Ladder.
  3. Drag a marker up or down. It moves in steps of 0.1 V.
  4. Or tap a marker to type an exact value, then tap Set.

The Voltages tab ladder: scale top, green, sleep, yellow, orange, red and scale bottom markers beside the live reading

The markers on the ladder:

  • Scale top and Scale bottom: the top and bottom of the face's scale.
  • Green above: readings above this show green.
  • Yellow above: readings above this show yellow.
  • Orange above: readings above this show orange.
  • Red below: readings at or below this show red.
  • Sleep below: your meter may sleep below this. See Low-Power Battery Monitoring Mode.

The app keeps the colours in order for you, so red always sits below orange, and orange below yellow. A marker the current face does not use is dimmed.

Set them against your real voltage:

  1. On the Voltages tab, tap On my graph.
  2. Your last 8 seconds of voltage show, with a line for each colour.
  3. Drag a line onto your real dips.

On my graph: the last 8 seconds of voltage with the green, sleep, yellow and red lines over it

Pick the colours:

  1. On the Face tab, tap the Colours tile (on some faces it is called Zone colours).
  2. Tap a colour to change it. Pick from the list, or tap Or any colour.
  3. On faces with an arc, you can also pick the Arc colour.
  4. To go back to the colours your meter came with, tap Back to the meter's colours.

The Colours sheet with the green, yellow, orange and red zone colours and the arc colour

Brightness

The meter screen is bright enough to read in daylight. For night driving, pick the Night face: dim orange numbers, with a small dot that shows the colour of your voltage. See Pick Your Face.

Additional Display Options

Screen direction. Turn the picture to match how your meter is mounted.

  1. Open the meter settings and tap the Meter tab.
  2. Tap the Screen tile.
  3. Tap the direction you want. The meter turns as soon as you tap.
  4. Tap Done.

On the HPVM, the square screen turns to any of four sides. On the HPVM Pro, the tall screen turns upright or upside down.

The Screen direction sheet with Upright, Turned right, Upside down and Turned left

Rotate faces. Your meter can step through a few faces by itself.

  1. Open the meter settings and tap the Meter tab.
  2. Tap the Rotate faces tile.
  3. Turn on Rotate faces.
  4. Tap the faces you want in the rotation, so each one shows a check mark.
  5. Tap Done.

You can also tick faces in All faces: tap the circle at the top right of a face.

The Rotate faces sheet, rotating on, with four faces ticked

Readings per second. Pick how often your meter measures, from 30 to 320 times a second. Faster readings show quicker bass hits, and the numbers move more. 60 per second is the usual pick.

  1. On the Meter tab, tap the Readings tile.
  2. Tap a speed.
  3. Tap Done.

The Readings per second sheet, from 30 to 320 per second, 60 picked

Main reading. On faces that show one main channel, the Main reading tile on the Face tab swaps it: tap CH 2 to show channel 2 as the main reading.

Low and high. Faces that show a lowest and highest reading have a Low and high tile on the Face tab. By default they show the last few seconds. Tap the tile to keep them on screen until you reset them.

The Meter Tab

The Meter tab holds the settings that are the same on every face.

The Meter tab: Screen, Sleep, Readings, Calibration, Rotate faces, Meter and Updates tiles, and This phone

Note

Don't see the Updates tile? Update the LF Audio app from the App Store or Google Play.

This phone sets the app's own live graph: how many seconds it shows (Graph width) and how smooth it looks (Smoothing). These stay on your phone and do not change the meter.

The This phone sheet with Graph width and Smoothing

Competition

Competition is a face made for burps and competition runs. It shows your live voltage, catches the lowest voltage of each hit, and holds it on screen so you can read it after the note ends.

To use it:

  1. Open the meter settings.
  2. Tap All faces, then the Competition group.
  3. Tap Competition to put it on your meter.
  4. Tap Tune on its card, or the Competition tile on the Face tab.

On the Tune screen:

  1. Trigger drop: your last few seconds of voltage, with a line at the drop that counts as a hit. Drag the line, from 0.2 to 2.0 V.
  2. Hold the low: how long the lowest reading stays on screen: 3, 5, 8 or 10 seconds.
  3. Resume when steady: clears the low once your voltage settles. Turn it off to keep the low until you reset it.
  4. Reset lowest: clears the lowest reading on the meter now.

The Competition Tune screen: the trigger drop line over the live graph, Hold the low, Resume when steady and Reset lowest

Note

Competition needs meter firmware 3.3.1 or newer. Update your meter in the LF Audio app to get it.

App UI

The LF Audio app shows only the settings that matter for your meter and its face. Change the face, and the tiles under This face uses change with it. On the Voltages tab, markers the face does not use are dimmed.