Overview
LF Audio regularly releases firmware updates for the HPVM and HPVM Pro that add new features, improve performance, and refine calibration. Updates are delivered over-the-air (OTA) and can be applied via Bluetooth directly from the LF Audio app, or via Wi-Fi for larger updates.
What's New in Firmware 3.3.3
For the HPVM Pro and the HPVM with v1.4 hardware:
- This update includes performance and stability improvements.
What's New in Firmware 3.3.2
For the HPVM Pro and the HPVM with v1.4 hardware:
- Your meter now remembers up to 8 phones and tablets.
What's New in Firmware 3.3.1
For the HPVM Pro and the HPVM with v1.4 hardware:
- Every gauge face has a new look, with sharper numbers and smoother dials.
- 9 new gauge faces: Hero, Tiles, Rings, Scope, Sag, Wire Loss, Columns, Night and Competition. Pick one in the LF Audio app. See Pick Your Face.
- Competition, made for burps and competition runs: it catches the lowest voltage of each hit and holds it on screen so you can read it after the note ends. See Competition.
- Set your voltage ranges from the app: drag where green, yellow, orange and red start, or set them right on your live voltage graph, and pick your own colours. See Color and Voltage Threshold Settings.
What's New in Firmware 3.2.7
For the HPVM Pro and the HPVM:
- This update includes performance and stability improvements.
What's New in Firmware 3.2.6
For the HPVM Pro and the HPVM with v1.4 hardware:
- This update includes performance and stability improvements.
What's New in Firmware 3.2.5
For the HPVM Pro and the HPVM:
- This update includes performance and stability improvements.
- On an HPVM with hardware older than v1.4: after this update, pair your phone with the meter again in the LF Audio app. See Pairing Again After Updating.
What's New in Firmware 3.2.3
For the HPVM Pro and the HPVM with v1.4 hardware:
- A stronger Bluetooth signal.
- After this update, if your phone does not connect, pair it with the meter again in the LF Audio app. See Pairing Again After Updating.
- This update includes performance and stability improvements.
Checking for Updates
Your meter's firmware and its updates are on the Updates tile.
Don't see the Updates tile? Update the LF Audio app from the App Store or Google Play.
- Turn on your meter and open the LF Audio app.
- On the Devices tab, tap your meter.
- Tap the gear at the top right, then SETTINGS, then the Meter tab.
- Look at the Updates tile. It shows the firmware on your meter, and Update available or Up to date.

- Tap Updates to open it:
- Firmware on the meter: the version your meter has now.
- Update available, with the new version. Tap What's in this update to see what you get, and to install it.
- Up to date: your meter has the newest firmware.
- Check now: asks again for a new update. Your phone needs to be online.
- Wi-Fi for updates: the network your meter uses to download an update. See Updating via Wi-Fi.

The orange banner. When an update is ready, your meter's page in the app also shows an orange banner at the top, and its card on the Devices tab says Firmware update available. Tap the banner to open What's in this update, the same as from the Updates tile.
Updating an HPVM Pro to firmware 3.2.2 or newer for the first time, an HPVM with v1.4 hardware to 3.2.3 or newer, or an HPVM with older hardware to 3.2.5 or newer? Have the unit's PIN ready. After the unit restarts, each phone needs to pair with it again, once (on Android, the app can do this for you). See Pairing Again After Updating.
Updating via Bluetooth
Installing from your phone needs no Wi-Fi.
- Open What's in this update: tap Updates on the Meter tab, then What's in this update. Or tap the orange banner.
- Read what the update gives you.
- Tap Install with Bluetooth.
- Keep your phone close to the meter, and keep the meter powered on.
- The app and the meter both show how far along it is.
- When it is done, the meter restarts and the app connects again by itself.
- Check the new version on the Updates tile.

While it installs, the meter shows Updating firmware and From the phone:

On an HPVM Pro with firmware 3.2.2 or newer, or an HPVM with v1.4 hardware on 3.2.3 or newer, live readings in the app pause during the update and come back once the app connects again.
Updating via Wi-Fi
With Wi-Fi, your meter downloads the update by itself. It is faster, and your phone does not need to stay close.
Wi-Fi updates need meter firmware 1.9.2 or newer. On older firmware, the Updates tile says Installs from this phone: use Updating via Bluetooth.
Set up Wi-Fi once:
- Open the meter settings, tap the Meter tab, then tap Updates.
- Under Wi-Fi for updates, tap Network. On Android, pick your network from the list. On an iPhone, type its name.
- Tap Password and type your Wi-Fi password.
- Use a 2.4 GHz network. The meter cannot use 5 GHz Wi-Fi.
- Tap Done.
The meter joins this network only to download an update, then leaves it.

Install an update over Wi-Fi:
- Make sure your meter is in range of that network.
- Open What's in this update from the Updates tile or the orange banner.
- Tap Install with WiFi. This button shows once Wi-Fi for updates is set.
- The app shows Updating over Wi-Fi. The meter shows how far along it is. Keep it powered on. You can leave the meter's page or close the app: the update keeps going, and the meter's card on the Devices tab reads Updating over Wi-Fi....
- When it is done, the meter restarts and the app connects again by itself. The app shows Update complete with the new version.
- If the app shows The update didn't finish, the meter still has its old firmware. Check the network name and password on the Updates tile, and that the network is 2.4 GHz and online. Then try again, or tap Install with Bluetooth.
- If the meter has not connected again after a few minutes, look at its screen. If it shows an error, turn the meter off and on, check its Wi-Fi, then try again.

Pairing Again After Updating
The first time your HPVM Pro updates to firmware 3.2.2 or newer, each phone you use with it needs to pair again, once. The same goes the first time an HPVM with v1.4 hardware updates to firmware 3.2.3 or newer, and the first time an HPVM with older hardware updates to firmware 3.2.5 or newer. Until then, the LF Audio app cannot connect to it and can show the unit with Pairing error. Keep the unit's PIN at hand (see Finding Your PIN).
The LF Audio app tells you before you install, at the top of What's in this update. On the Android phone that installed the update with Bluetooth, the app pairs again by itself if you paired the unit from the app with its PIN; if your phone asks you to confirm the pairing, accept it. On that phone you can skip the steps below; every other phone you use with the unit needs them. See Updates That Need Pairing Again.
On each phone:
- Remove the old pairing in the app. If the app shows a Pair Again or Connection Problem message for the unit, tap Remove & Re-pair. If it does not, open the unit's page (from the Devices tab, or under Paired with this phone after tapping Add device), tap Forget Device, then tap Forget Device again to confirm. See Forget a device.
- If the unit (LF_HPVM-PRO, or LF_HPVM for an HPVM) is still listed in your phone's Bluetooth settings, remove it there too. On Android, tap it and choose Forget (some phones say Unpair). On an iPhone, open the Settings app, tap Bluetooth, tap the info button next to the unit, then tap Forget This Device.
- Back in the app, tap Add device, tap your unit (LF_HPVM-PRO or LF_HPVM) under Available to pair, and enter the unit's PIN. See Bluetooth Pairing.
After that, the app reconnects to your unit automatically. On Android, if you use a home screen widget for this unit, you may need to set it up again. See Android Home Screen Widgets.
If an Update Fails
If an update stops part way, for example when the Wi-Fi drops, your meter keeps the firmware it had. It starts as before, and you can try the update again.
Downloading the Update Again
A normal update installs only firmware that is newer than what your meter has. To put the newest firmware on your meter again, even when it is up to date, use Download the update again. Use it when an update did not finish, or when LF Audio support asks you to.
- Set up Wi-Fi for updates first. See Updating via Wi-Fi.
- Open the meter settings, tap the Meter tab, then tap Updates.
- Tap Download the update again.
- Tap Download again to confirm.
- The meter gets its newest firmware over Wi-Fi, then restarts. Keep it powered on until it is back.

Download the update again is on meters with firmware 3.0.0 or newer. It is greyed out until a Wi-Fi network is set.
For a normal update to a newer version, use Checking for Updates.