Install
Wire it up and turn it on for the first time. Pick your product below.
WVC Bass knob
- Quick Install GuideWatch these videos to get your WVC up and running.
- Installation GuideThis article covers the physical installation of all WVC models: wiring, antenna connection, RCA hookup, temperature probe placement, and first-time power-on.
- WVC-PRO 6 First Boot and Display OverviewThis article covers what to expect when powering on the WVC-PRO 6-Channel for the first time, including the main dashboard screen, status icons, and the settings available in the on-device UI.
HPVM Voltmeter
RTC Touch controller
- Installation GuideThis guide covers the physical installation and wiring of your RTC (Rotary Touch Controller) with any compatible base station: WVC, WVC-LITE, WVC-PRO, or WVC-PRO 6.
- First Boot and PairingWhen the RTC powers on for the first time (or after a factory reset), a getting-started wizard guides you through pairing with your WVC base station.
BassWatch Watch display
SSA Signal analyzer
WDD-LITE Data display
- Installation GuideThis guide covers the physical installation and wiring of your WDD-LITE (Wireless Data Display Lite) with any compatible base station: WVC, WVC-LITE, WVC-PRO, or WVC-PRO 6.
- First Boot and PairingWhen the WDD-LITE powers on for the first time (or after it is reset), a getting-started wizard guides you through pairing with your WVC base station.
WTH Temperature hub
- Installation GuideThis guide covers the physical installation of your WTH (Wireless Temperature Hub): mounting the hub, wiring vehicle power, attaching the antenna, and connecting your temperature sensors.
- First Boot and PairingThe first time you power on your WTH, it walks you through a short setup, then it is ready to monitor temperatures.